A wall that you build in the direction of the valley simplifies the creation of the water zones. it makes the pond look natural when concealed with plants. the wall evens out the level. in the edge area, the liner can be well hidden. if the slope is large, you should pour a foundation and build a wall on it. Keep in mind that when you level a pond on a slope, you don’t want to use any heavy edging materials around or near the pond for at least one full week. it would be best if you gave the pond some time to settle. pond edging and leveling on a slope. it takes a lot of planning to create a level pond on a slope.
Tiles, like stone slabs, can be placed in a mortar bed up to the water’s edge. tiles come in various shapes and colors and are suitable for modern pond edge design, especially for a natural pool or a sleek looking koi pond. to give your pond edge a more relaxed appearance, you can arrange tiles in a mosaic pattern. Pond on the slope – how to succeed in the project a pond on a slope can look very charming and natural when integrated into the landscape. however, such a pond is associated with various difficulties and poses a more significant challenge to pond. To build your pond on a slope, you either have to level it beforehand or be prepared to build a dam, embankment or retaining wall on the downward side of the slope. building a pond on a slope without leveling or damming risks losing the water to gravity as it runs out of the pond and down the slope. building a pond always comes with challenges. A pond of 12 foot depth and 2:1 side slope would create a slope occupying 2 x 12 feet = 24 feet. similarly, a side slope of 4:1 would create a slope occupying 4 x 12 feet = 48 feet. these two slopes are subtracted from the length of the excavation at ground surface (or top of the pond) to yield the bottom length and width.
To build your pond on a slope, you either have to level it beforehand or be prepared to build a dam, embankment or retaining wall on the downward side of the slope. building a pond on a slope without leveling or damming risks losing the water to gravity as it runs out of the pond and down the slope. building a pond always comes with challenges. A pond of 12 foot depth and 2:1 side slope would create a slope occupying 2 x 12 feet = 24 feet. similarly, a side slope of 4:1 would create a slope occupying 4 x 12 feet = 48 feet. these two slopes are subtracted from the length of the excavation at ground surface (or top of the pond) to yield the bottom length and width. In this instance we decided to place the pond at the top of the garden underneath the rainwater harvesting guttering to the north of the pond (inlet) and the overflow (outlet) was constructed on the southern side of the pond to take advantage of the slope and soak into the productive beds, the location of which we had pegged out the week before. Step 5 – place slabs. the surround will sit on the lip of the pond, which should now be a little below the original ground level. place the slabs around the pond and mark their approximate position. remove grass and soil to a depth of about 65 mm (2½ in) to accommodate the slabs. step 6.
Comments are closed.