Rebuilding Your Engine Part 9 Intake Manifold Install Youtube We top off the small block chevy with the intake manifold. Tips on installation and galvanic corrosion using stainless fasteners.automotive engines diagnosis repair rebuildingautomotive engines diagnosis repair rebui.
Engine Building Part 9 Intake Manifold Installation Youtubeођ How to installed harley davidson intake manifold with no leak.i explain the different installation methods i performed when replacing intake manifold gaskets. Step 3: install the manifold. carefully reinstall the manifold onto the engine. it may be heavy, so get some help if you need it. when the manifold is lined up to the engine, start a couple of bolts to hold the gasket in place while you get everything situated. install the fasteners and tighten them up evenly. Part 2 of 9: draining the vehicle’s fluids. step 1: raise the front of the vehicle. raise the front of the vehicle off the ground, and lower it onto jack stands. set the parking brake, and place wheel chocks underneath the rear wheels. step 2: drain the engine’s oil into a pan. Step 10 – remove the intake manifold and fuel rail assembly. take extra care when removing the manifold and fuel rail assembly. gently lift up and slightly pull it forward. at the back of the manifold, you will need to feed the brake booster hose around and over the top of the oil sending unit and its wiring harness.
Comments are closed.