Daikin Ac Remote Function Symbols Meaning Ac Guide Cool, heat, vent, fan, dry or auto the words “cool”, “heat”, “vent”, “fan”, “dry” or “auto” are displayed to present the operation mode. the airflow rate (airflow level fan speed) symbol is displayed to show the airflow rate that is set for the indoor unit. the airflow rate will not be displayed if the indoor unit does not have the airflow rate control function. airflow. Do not wash the air conditioner or the remote controller with excessive water. electric shock or fire may result. do not install the air conditioner or the remote controller at any place where flammable gas may leak out. if the gas leaks out and stays around the air condi tioner, a fire may break out. do not touch the switch with wet fingers.
Daikin R410a Remote Control Manual Select activate set button. from the home screen, enter the main menu. from the main menu, enter one of the submenus. from their respective submenu, activate an operation ventilation mode. read this manual before using the product. this manual describes the basic operation of the indoor unit which uses the brc1h71w remote controller. On off timer operation: check that the clock is correct, and then press off. press the timer setting button (increments of 10) until the time setting reaches the setting you want. press off again and the timer lamp lights. 14. clock button: to set the clock, press the clock button, and [0:00] is displayed. Following remote control settings by the group, by the zone or collectively: 1. start stop 2. operation mode 3.temperature setting: (remote control) inhibited : (remote control) inhibited : (remote control) inhibited: (remote control) permitted : (remote control) permitted : (remote control) permitted: priority ¡start stop. Maintaining the unit and lcd display. wipe the lcd and surface of the remote controller with a dry cloth when they become dirty. if the dirt on the surface cannot be removed, soak the cloth in neutral detergent diluted with water, squeeze the cloth tightly, and clean the surface. wipe the surface with a dry cloth.
Daikin Ac Modes Symbols Following remote control settings by the group, by the zone or collectively: 1. start stop 2. operation mode 3.temperature setting: (remote control) inhibited : (remote control) inhibited : (remote control) inhibited: (remote control) permitted : (remote control) permitted : (remote control) permitted: priority ¡start stop. Maintaining the unit and lcd display. wipe the lcd and surface of the remote controller with a dry cloth when they become dirty. if the dirt on the surface cannot be removed, soak the cloth in neutral detergent diluted with water, squeeze the cloth tightly, and clean the surface. wipe the surface with a dry cloth. 2°c in dry operation from set temperature. when the room temperature exceeds 30°c, the operation changes the temperature 1°c in cool . 1°c in dry operation from set temperature.this operation decreases the. ort airflow and intelligent eye operationthe air conditioner can go into operation with the comfort air. Indoor unit. ol heat selection privilege to an indoor unit1press and hold the operation mode selector button on the. wireless remote controller for about 4 seconds.the timer indicator lamp (green) on the displays of all the indoor units connected to the s. 2.
Daikin Air Conditioner Manual Symbols 2°c in dry operation from set temperature. when the room temperature exceeds 30°c, the operation changes the temperature 1°c in cool . 1°c in dry operation from set temperature.this operation decreases the. ort airflow and intelligent eye operationthe air conditioner can go into operation with the comfort air. Indoor unit. ol heat selection privilege to an indoor unit1press and hold the operation mode selector button on the. wireless remote controller for about 4 seconds.the timer indicator lamp (green) on the displays of all the indoor units connected to the s. 2.
Comments are closed.