Removing The Shotgun Barrel From The Receiver Stock Photo Image Of Has anyone removed a barrel from a completed receiver? i've been demilling kits like crazy in preparation for builds, but i'm using the gear puller in the vise method. i use my press to push out the barrel pins. i'm guessing the press would be the best way to push out the barrel in this case, but how do i go about it? the rifle in question is. There is a forum member "viktor bout," who offers a tool that works with the ak builder press kit to remove a barrel from a full receiver. i bought one of these tools recently, but i am not sure if he has more. look him up, or possibly find another forum member knows the link to the listing thread, which has pictures.
How To Make A Simple And Effective Ak Barrel Back Out Tool Ronin S Grips Clamp it securely, i use my press and aluminum blocks. then a 2 foot cresent wrench on the stub sometimes w a pipe on it and sometimes you'll need to smack the wrench w a hammer to jar it. ive used a little heat before as well. you will be very lucky if your barrel will time to the receiver that you have that is threaded. You will have to either get a toth tool or an ak builder tool to remove the barrel. the ak builder one requires a 12 ton harbor freight press. also you will need to have the means to drill the holes in the barrel for the gas block, front sight, barrel pin, and gas port if they are not already there. Option 1: use a hydraulic shop press. this is definitely a proven method. 12 20 ton shop presses were traditionally the go to tools for a lot of ak work relating to barrels and rivets. for barrel work, guys use jigs from ak builder and others plus can make their own. Removing the barrel of an ak 47 can be a complex task, requiring specialized tools and expertise. to remove the barrel, you need to disassemble the rifle, remove the gas tube, front sight block, and barrel components, then use a barrel press or hydraulic press to push the barrel out of the receiver.
Comments are closed.