#neogeopocketcolor #modernlcdhey guys! a quick video about installing a modern lcd in a neo geo pocket color.kit can be found at: console5 store. Ribbon cable connections orientation. bracket usage. black shown for contrast, but clear will be included. for ngpc slim, you may need to cut off the upper portion of the bracket if the case cannot close cleanly, leaving only the lower portion that attaches to the screw posts. apply anti shorting film to the back of the lcd. reassemble and test!.
By gently twisting the front shell, the whole display should come off, at least from a corner. a small plastic tool can help. then remove the adhesive tape on which the screen was glued on, either with your finger’s nail or a tweezer the front screen protector also need to be removed : just push it gently from the back. Neo geo pocket color newbie questions. i fell down the retro handheld modding rabbit hole last year and recently picked up an og fat model neo geo pocket color. i plan on reshelling and installing the q5 lcd screen. unfortunately, the screwdriver in my repair kit is too wide to fit into the screw wells. there are five jis screws and one triwing. The neo geo pocket color just got a high quality replacement lcd that looks amazing and is a zero effort mod, just unplug the old screen and plug in the new screen and its circuit board to get going. the only problem is that the new lcd isn’t the same size as the original, its smaller and doesn’t fill the whole screen area. A modern lcd ips screen replacement for your neo geo pocket color. with its bright colours and crisp images your ngpc has never looked so good! only minor soldering required!.
Comments are closed.