The Correct Direction To Install Performance Rotors On Your C Did you just get some shiny new performance drilled and slotted rotors for your vehicle? did you know there is a correct way for them to face? check out this. Created on: 2020 08 13. this video shows you which way to orient your performance brake rotors, and why. hi, everyone, just want to talk to you real quick about directional rotors, how to install them properly on your car. this is the set that we sell on the 1aauto site. and as you can see, there are drilled holes and actually angled grooves.
Which Way How To Properly Install Rotors Zeckhausen Racing Depending on the manufacturer, the slots or holes could lean either direction. if the rotors have straight cooling vanes, they can be installed on either side. the direction of the slots or holes is up to you. whichever way you think looks better will work. (if the manufacturer specifies a direction, always follow the instructions.). Use jack stands to support the vehicle. b. remove the wheels (you may need to loosen the wheel nuts while it’s still on the ground). c. unbolt the brake caliper from the hub or caliper bracket. on some vehicles, the caliper bolts are “hidden” behind plastic plugs that simply pop out with a screwdriver. The direction of the slots on the outside of the rotor do not dictate whether the rotor is a left or a right. for rotors with slots machined in the same direction as the internal cooling vanes, the slots should lean toward the back of the car. for rotors with slots machined in the opposite direction as the internal cooling vanes, the slots. This helps to keep the rotors cooler and cleaner so they work at top efficiency. the easiest way to describe the correct rotation of your rotors would be to locate the uppermost slot and or row of drill holes and make sure that it is pointing to or sweeping towards the rear of your vehicle. we also mark the inside of each rotor with an "l" (for.
Comments are closed.