Making A Celtic Knot Rolling Pin Youtube Click "show more" below for links & notes subscribe (free) to stumpy nubs woodworking journal stumpynubs subscribe to our channel https. In this video i make a table saw sled to make perfect celtic knots in rolling pins. this was worth the time to make as the first knot turned out fantastic!th.
Celtic Knot Rolling Pins Woodturner Pro Step 2: making the cuts. identify the centre of your stock both end to end and side to side. for convenience, i also numbered the sides, the reason for this will become apparent. i added a stop to my mitre saw to ensure all of the cuts were centred on the same point. you will see later that i made a mistake by not hitting the stop and left a. Updated technique to get perfect celtic knots, every time!here is the video from inspire woodcraft on how to cut perfect splines without any fancy measuremen. Celtic knot rolling pin. i saw one of these in a gift shop and researched how to make it. the glue up is complex, and i built a jig to facilitate the sawing, glue up and clamping. after the blank is created, it is turned on the lathe and the caps are added to hide the lathe center marks. this one is made of brazilian cherry and maple. Close up of the thin pieces that create the knot. i make the thin strips the same width as the pin blank. during the cutting assembly process, the diagonal slot, for these strips, is cut in the blank but not all the way thru. the cut leaves about 1 16" of the blank in tack. this maintains the knots orientation evenly around the blank.
Comments are closed.