So the torsion spring that holds the head on the sieg x2d sucks. it doesn't hold the head in position and can make feeding the z axis very jumpy when milling. #sieg #sx2p #minimillmy attempt at upgrading the stock head support on my sieg sx2p chinese mini mill to a gas strut. as usual i take the long way round!the.
The sieg x2d mini mills are popular hobbiest machine tools, but the quality of the electronics is really, really poor. brand new, the mill i got from little. 20. mar 1, 2014. #1. just completed installing an air spring on my hf mini mill. i used a method i had seen on a video. basically installing the air spring using the existing bolt used for attaching the torsion spring to the head and the left rear mounting bolt used to secure the mill to the bench. that way the height of the machine was. The spring kit installation isn't too complicated either. the process [with the mill disassembled] took less than 30 minutes. the steps included: drilling a 10mm hole in the back of the column. drilling and taping two m6x1 screw holes. bolting a [provided] braket and post to the head. bolting the air spring to the column. bolting the two together. I traded the harbor freight mini mill with the adjustable column to someone that requires that feature and got a new sieg x2d with the solid column, larger table, and air shock. after a couple of days completely disassembling, cleaning, and repainting parts grey in color, i wanted the mill to be as accurate and precise as i could possibly make.
The spring kit installation isn't too complicated either. the process [with the mill disassembled] took less than 30 minutes. the steps included: drilling a 10mm hole in the back of the column. drilling and taping two m6x1 screw holes. bolting a [provided] braket and post to the head. bolting the air spring to the column. bolting the two together. I traded the harbor freight mini mill with the adjustable column to someone that requires that feature and got a new sieg x2d with the solid column, larger table, and air shock. after a couple of days completely disassembling, cleaning, and repainting parts grey in color, i wanted the mill to be as accurate and precise as i could possibly make. This user’s guide covers operation and care of the sieg x2d mini mill. be sure to read and understand the safety guidelines presented in this book before using your mini mill. specifications end milling capacity 0.6" (16 mm) face milling capacity 1.2" (30 mm) drilling capacity 0.5" (13 mm) table size 18.1" x 4.7" (460 mm x 120 mm). Kits for using, upgrading, and repairing x2 mini mills, including power feeds, belt drives, air springs, spare parts kits, and tooling bundles. hide thumbnails. 2258 air spring conversion kit. $52.95. not in stock. 2560 belt drive conversion kit, mini mill. $159.95.
This user’s guide covers operation and care of the sieg x2d mini mill. be sure to read and understand the safety guidelines presented in this book before using your mini mill. specifications end milling capacity 0.6" (16 mm) face milling capacity 1.2" (30 mm) drilling capacity 0.5" (13 mm) table size 18.1" x 4.7" (460 mm x 120 mm). Kits for using, upgrading, and repairing x2 mini mills, including power feeds, belt drives, air springs, spare parts kits, and tooling bundles. hide thumbnails. 2258 air spring conversion kit. $52.95. not in stock. 2560 belt drive conversion kit, mini mill. $159.95.
Comments are closed.