In this video we show you how to remove and install the vw audi group quick disconnect fuel line clipslink to search i used to find the tools: amzn.t. Help with fuel line connector. i was replacing the in tank electric fuel pump and i didn't have the correct tools to get the fuel line connector off, and my buddy and i completely screwed it up, i need to know if i can replace the fuel connector exclusively or if i need to replace the whole line. it's the "vl" not the "rl" line.
This is by far the easiest method to install fuel line quick connects with no heat or boiling water, without buying the expensive dorman tool. How to remove and install fuel lines on a fuel pump on a volkswagen jetta and audi 1998 2005. 4) unscrew the three phillips screws and remove the panel. 5) disconnect the fuel line (black) from the fuel pump and tie a string around the fuel line connector. 6) push the fuel line connector under the panel to give yourself some slack underneath the car. be careful not to pull too hard so that it gets stuck!. Krd performance 2 pcs 7.89mm sae 5 16 (8mm) straight nylon fuel line hose quick release connector dummy fuel line quick connector for 5 16 inch steel to 1 4" id nylon tubing, pack of 2.
4) unscrew the three phillips screws and remove the panel. 5) disconnect the fuel line (black) from the fuel pump and tie a string around the fuel line connector. 6) push the fuel line connector under the panel to give yourself some slack underneath the car. be careful not to pull too hard so that it gets stuck!. Krd performance 2 pcs 7.89mm sae 5 16 (8mm) straight nylon fuel line hose quick release connector dummy fuel line quick connector for 5 16 inch steel to 1 4" id nylon tubing, pack of 2. The performance tool w83115 fuel line clip removal pliers are the perfect tool for quick and easy fuel line removal during maintenance or fuel filter replacement. these pliers are designed to compress quick disconnect lugs without damaging the connector, ensuring that your fuel lines stay in good condition. Remove both plastic covers. 5. disconnect both fuel lines marking them for installation. 6. remove flange locking ring on both tanks. (more on this later) 7. the passenger side with the pump unplug the pump connector. 8. lift the pump and pull the hose out of the basket for the syphon pump return.
Comments are closed.