Warren Truss Bridge Popsicle Stick Step 7: building the side of the bridge. 1. begin with making 11 triangles. take 3 popsicle sticks and lay them out in a triangle shape. attach an end of one side stick to an end of the bottom stick with hot glue (be sure to place the side stick at a 45 degree angle). repeat this with the other side stick. Step 2: bridge railing. glue some popsicle sticks into a w shape then attach a popsicle stick on both of the points. after that is done make a second one and glue to the sides of the bridge. lastly you connect the top with 2 popsicle sticks to make it secure. hope you enjoyed this project!.
How To Build A Popsicle Stick Truss Bridge Flatdisk24 Step 1: design your bridge. there are many ways to build bridges, both real bridges and popsicle stick bridges. do some research, be creative, and remember triangles are strong. a triangle spreads out weight and is much more stable than a simple rectangle or square support. be sure to incorporate lots of triangles into your bridge design. Hot glue the craft sticks to the gussets. take care to make the glued connections neat, aligning the craft sticks to form tidy equilateral triangles. once the glue sets, flip over the truss and attach craft sticks to the other side in the same fashion, for double strength. build a second truss in the same way. Using a 3 stick beam and a 2 stick beam that has mostly dried, attach them with the sticks making a triangular pattern. once it dries a for about 15 minutes, flip it over and repeat the triangular pattern on the other side to make it double thick. you will repeat this to make the two trusses for the sides of the bridge. Cut four popsicle sticks in half. place each of the halved popsicle sticks at both ends of each of the truss beams, in the middle position of the three wide popsicle sticks. the component three wide popsicle sticks of each truss will be glued together to form a truss three sticks thick. 2. glue your truss beams together.
Comments are closed.