3394651 Dryer Drum Oem Belt Walmart This dryer drum belt (whirlpool dryer belt, drive belt) has four ridges, three grooves and is 1 4" wide, and 92 1 4 inches in length. it comes in black and is made of rubber. the belt transfers the rotation of the motor to turn the drum. the belt attaches to the drum, idler pulley, and motor pulley. [overview] drum belt 341241 attaches to the motor pulley and spins the drum as the motor rotates. it is the most common belt used on whirlpool, kenmore, inglis, roper, estate, kitchen aid, and other brand dryers. [92" drum belt] the circumference of drum belt 341241 is 2337 mm or 92 inch. 1 4" wide, 4 ribs, 3 grooves.
Whirlpool Front Load Dryer Drum Belt Replacement 341241 Item #529597 | whirlpool oem part #341241. grid is 1 inch square. dryer drum drive belt. this belt is approximately 1 4" wide x 92 1 4" long. it is belt is flat on one side and has 4 ribs and 3 grooves on the other. it replaces many other belts, including some with 5 ribs and 4 grooves. the belt attaches to the motor pulley and spins the drum. About this item. 341241 dryer drum belt. this drum belt is approximately 1 4" wide x 92 1 4" long. this dryer drum belt is flat, and has 4 ribs and 3 grooves. it replaces many other belts,. Dryer drum belt, 4 rib, 3 groove, 92" long. manufacturer suggests maintenance kit #4392065 (includes 691366 pulley, 349241t drum rollers and 341241 drum belt). Dryer drum belt 341241. 1. unplugged dryer. 2. removed the lint filter and removed the two phillips screws inside lint filter lid. 3. using a paint scraper, insert under the top about 2" from the right corner, push the scraper in between the top and the front panel to release the snap connector, then pry release the top right hand side.
Comments are closed.